The Environics, Inc. Post

Using with Program Mode - Win 7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Wed, Jul 19, 2017 @ 10:21 AM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

Today, we look at program mode. ProgramModeProgram mode allows the three basic run modes (Concentration, Flow and Divider) to be grouped together into a "Program," or sequence of operations. Each step in the program is executed in sequence until all steps have been completed. So, before you can set up a program, you will need to have set up all of the necessary concentration, flow or divider modes. You can check out our earlier videos to learn how to do that.

To check out the earlier videos and to be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 


 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000

Using with Divider Mode - Win 7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Thu, Jul 13, 2017 @ 12:08 PM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

Today, we look at divider mode. Unlike flow and concentration mode, not all units are configured to be able to use divider mode. If you aren't sure, feel free to ask us!

To check out the earlier videos and to be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 

 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000

Using with Flow Mode - Win 7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Mon, Jun 12, 2017 @ 11:25 AM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

We started with how to initially add your instrument to the software and then moving to step two, adding cylinders. With that behind you, you were ready for the next step, which was adding your profile to the software.

These basic steps are all you need to start using the unit in one of 3 modes: concentration, flow and divider mode. The last video focused on Concentration Mode, and today we take a look at using Flow Mode.

To be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 

 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000

Working with Concentration Mode - Win 7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Thu, Jun 08, 2017 @ 10:25 AM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

We started with how to initially add your instrument to the software and then moving to step two, adding cylinders. With that behind you, you were ready for the next step, which was adding your profile to the software.

These basic steps have you ready to start using the unit in one of 3 modes: concentration, flow and divider mode. These can then be used in program and schedule modes. Over the next few videos, we will take a look at the best way to set up these modes, beginning with Concentration Mode.

To be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 

 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000

Creating Profiles - Win 7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Mon, Jun 05, 2017 @ 12:25 PM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

We started with how to initially add your instrument to the software and then moving to step two, adding cylinders. With that behind you, you are ready for the next step, which is adding your profile to the software.

To be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 

 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000

Creating Cylinders - Win 7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Thu, Jun 01, 2017 @ 12:25 PM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

We started with how to initially add your instrument to the software. Today we have a short video to show you the next step, which is adding your cylinders to the software.

To be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 

 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000

Working with the Win7/8/10 Software for the Model 4000

Posted by Rachel Stansel on Thu, May 25, 2017 @ 02:10 PM

While many customers are accustomed to our operating software for the Series 4000/4020/4040, most are now beginning to use to our newest software as they upgrade to new computers with Win 7/8/10. To help you get started, or as a refresher if it's been awhile, we will be posting some short how-to videos that will help you get set up and running your unit like a pro in no time.

The software can be downloaded here. We recommend making sure you have the most current version by bookmarking the download page. You can also sign up for automatic notices of new versions by submitting a request through our contact page.

We start with how to initially add your instrument to the software. You would need to have the following prior to beginning: your powered on unit connected to the computer via USB or serial port, the newest version of the operating software and your data files (provided on a CD with the unit). That's it. Well, a cup of coffee or tea might be nice!

To be notified as we post the other videos in this series, subscribe to the blog (above) or to our YouTube Channel!

 

 

 

 

 

Tags: Series 4040, Series 4020, Series 4000 Software Video Tutorials, Series 4000